P3 International E 9300 EXITQuit, Entering the rain sensor calibration value, Next

EXITQuit

configuration

or

NEXT Expanded settings

+	–	Calibration
		value

NEXT

+	–	Unit for
		rainfall

NEXT

All the settings required for the weather station to operate normally have now been made. The expanded settings are not needed for normal operation.

Press the "EXIT" key to leave configuration mode and return to normal mode.

Press the "NEXT" key in order to make expanded settings and to calibrate the rain sensor.

Entering the rain sensor calibration value

The rainfall measuring system is delivered from the factory with high accuracy, so that normally no calibration is required. Please only make adjustments if necessary.

The calibration value must initially be determined in normal mode as described under 7.2.

Enter the previously calculated calibration value using the "+" and "-" keys.

Press "NEXT" to proceed to inputting the unit of rainfall measurement.

Setting the unit for rainfall measurement

The unit for the rainfall is indicated in the "RAIN" field and can be expressed as l/m2 mm, or inches.

Select the desired unit using the "+" and "-" keys.

Press "NEXT" to get to the input function for the indicator path.

13