3
4
5
NOTE: The curved portion of the pole is the top and it should face the inside of the swing frame.
Connect the two horizontal poles (must first be disassembled from the seats) to the two vertical poles using the hardware provided. Be sure that the plastic bushings are between the vertical poles and horizontal poles.
Reattach the seats onto the horizontal poles using the flat headed screw, washer, and lock nut.
Once fully assembled, check that the glider swings freely. If it does not, make sure that the bolts holding the vertical poles to the top bar attachment are not overly tightened.
Part Ref. #: PSHW15, PSHW11
Part Ref. #: PSHW1
Part Ref. #: PSHW21, PSHW36
SWING AND TRAPEZE ASSEMBLY
•Swing seats should be attached to the chain.
Step | Illustration | Instructions | Hardware Reference |
1 |
| Hang the swings and trapeze in place from the |
|
|
| swing hooks. |
|
|
|
|
|
8 | ©2006 Pacific Cycle, Inc. |