Pacific Cycle 22-PS245 Glider Assembly, Step Illustration, Instructions, Hardware Reference

	NOTE: One support bar has holes for the
	slide attachment. The holes should be
	positioned toward the front of the swing set.
	GLIDER ASSEMBLY
Required Parts:	Vertical Poles x2 (Footrests attached)
Glider attachment x1	Horizontal Poles x2 (Seats attached)

Pre-Assembled Parts:

•The seats should be attached to the horizontal poles. These must be disassembled to complete the steps below.

•The foot rests should be attached to the vertical poles.

Step Illustration	Instructions
1	Secure the glider attachment with the V-
	screw and the bolts at the squared portion
	of the top bar.

Hardware Reference

Part Ref. #: PSHW35, PSHW22

2

Attach the two vertical poles to the glider attachment. Start by removing the hardware from the lower section of the glider attachment. Align the vertical bar with the glider attachment and re-insert the hardware. Repeat the process for the other side.

Part Ref. #: PSHW21, PSHW36

7 ©2006 Pacific Cycle, Inc.