2
Check the lock nut and bolt on the swing seat to make sure that they are secure.
Part Ref. #: PSSH11, PSHW13
SLIDE ASSEMBLY
Required Parts:
Slide x1 | Rail/Ladder Leg x2 | Front Leg x1 | Ladder Step x2 | Link Bar x2 |
Proper Placement:
Slide Assembly | Correct Location | Incorrect Location |
•The screws and bolts for the slide rail/ladder legs are inserted on the slide. They will need to be removed prior to inserting the legs into the slide.
•The ladder steps should have screws and nuts installed. These will need to be removed prior to inserting the legs and then reassembled with the head of the screw facing out.
Step | Illustration | Instructions |
1 |
| Remove the screws, washers, and lock nuts from |
|
| the holes in the slide. |
|
|
|
Hardware Reference
Part Ref. #: PSHW24
9 | ©2006 Pacific Cycle, Inc. |