16 Packard Bell oneTwo M3350 / oneTwo M3351 / oneTwo L5350 / oneTwo L5351 Service Guide

Advanced BIOS Features
Field Description Value
Quick Boot When enabled, the system starts up more quickly be elimination some of
the POST routines. Enabled
Disabled
Quiet Boot When enabled, BIOS will show a full screen logo when booting; if
disabled, BIOS will show the diagnostic POST screen when booting. Enabled
Disabled
1st/2nd/3rd/4th
Boot Device Displays the device assigned to the specified boot sequence. The Setup Utility attempts
to boot the operating system in this order. By default, the computer searches for boot
devices in the following order:
• Hard disk
• Optical drive (CD/DVD)
• Removable device
• Network boot (LAN)
Hard Disk Drive
Priority Press Enter to specify the boot device priority sequence for the installed hard drive(s).
Optical Disk Drive
Priority Press Enter to specify the boot device priority sequence for the installed optical drive.
Removable Device
Priority Press Enter to specify the boot device priority sequence for removable drives.
Network Device
Priority Press Enter to specify the boot device priority sequence foe available network drives.
Bootup Num-Lock If you set this item to On, the keyboard Num Lock key will be active when
the computer boots up. On
Off
Boot Sector Virus
Protection If set to Disabled, when anything attempts to access the boot sector or
hard disk partition table, there will be no warning message. Enabled
Disabled
USB Beep
Message Select whether to allow the BIOS to emit error beeps or display error
messages during USB device enumeration. Enabled
Disabled