Packard Bell oneTwo M3350 / oneTwo M3351 / oneTwo L5350 / oneTwo L5351 Service Guide 47
Removing the Mainboard
1. Remove the TV tuner card by following the procedure described on page 36.
2. Remove the graphics card by following the procedure described on page 37
3. Remove the hard drive by following the procedure described on page 40.
4. Remove the HSF assembly by following the procedure described on page 43.
5. Remove the processor by following the procedure described on page 44.
6. Remove the memory modules by following the procedure described on page 46.
7. Remove the RTC battery by following the procedure described on the previous section.
8. Remove the hex screws securing the serial-to-DVI cable.
9. Detach the serial-to-DVI cable from the I/O port panel bracket.
Quantity Color Torqu e Part Number
2Silver 4.5 kgf-cm 86.80536.7R2