Packard Bell M3350 manual Load Default Settings, Save & Exit Setup, Exit Without Saving

Load Default Settings

Execute this menu to load the factory-default settings for all Setup parameters. Keyboard shortcut: F9

Perform the steps below to load the system default settings:

1.Select Load Default Settings, then press Enter. You will be prompted to load the system defaults.

2.Select OK, then press Enter.

3.Press F10 to save the changes you made and close the Setup Utility.

Save & Exit Setup

Execute this menu to save the changes made and closes the Setup Utility. Keyboard shortcut: F10

Exit Without Saving

Execute this menu to closes the Setup Utility without making any changes.

24 Packard Bell oneTwo M3350 / oneTwo M3351 / oneTwo L5350 / oneTwo L5351 Service Guide