Packard Bell M3350 manual Removing the Memory Modules, Removing the RTC Battery

Removing the Memory Modules

1.Remove the wall mount plate by following the procedure described on page 35.

2.Open the holding clips securing the memory modules (a), then remove the memory modules from the DIMM slots (b).

Removing the RTC Battery

1.Remove the wall mount plate by following the procedure described on page 35.

2.Detach the socket latch from the RTC battery.

3.Remove the RTC battery from its socket.

The RTC battery has been highlighted with a yellow circle in the above image. Detach the RTC battery and follow local regulations for disposing it.

46 Packard Bell oneTwo M3350 / oneTwo M3351 / oneTwo L5350 / oneTwo L5351 Service Guide