Palm manual Using Your Palm Wi-Fi Card with the Treo 700w Smartphone, Chapter

Using Your Palm® Wi-Fi®Card with the Treo™ 700w Smartphone CHAPTER 1

1.Wake up your smartphone’s screen, and then insert the Wi-Fi card into the expansion card slot.

2.Tap Wi-Fi in the title bar.

3.Select the Settings link.

4.Select Network Cards .

5.Select Add New.

6.On the General tab, set the following:

•Network name: Specifies the SSID provided by the system administrator.

•Connects to: Specifies whether this connection connects to the Internet or

to Work. You may need to select Work to access a corporate intranet.

•This is a device-to-device (ad-hoc) connection: Indicates whether you’re connecting to another device or to an access point (network).

7.Select the Network Key tab, and then set the following:

•Authentication: Sets the method used to identify devices that connect to the network.

—Open: Indicates the network uses open authentication.

—Shared: Indicates the network uses shared authentication.

—WPA: Indicates the network is a WPA network that uses 802.1x protocols.

Using Your Palm Wi-Fi Card 5