Palsonic 5179G To skip a position number, POS+/- button, To restore skip a position number

OPERATION

Tuning in (continued)

To skip unnecessary position numbers and MFT (Manual Fine Tuning)

To skip a position number

After presetting the channel you can skip unnecessary position numbers so that only the channels you want to watch are selected with POS+/- button.

		PRESET
1.
	Enter into the PRESET menu, press the POS+/-	POS	24
		SKIP	OFF
	button to select POS., then select the unwanted	BAND	UHF
	program number withthe VOL+/- button.	FINE
		AFT	ON
		SEARCH
		ASM	OFF
		S-RCV
2.	Press the POS+/- button to select "SKIP". Press the
		PRESET
	VOL+/- button to select "SKIP ON".
		POS	24	(or OFF)
	Thus, after exiting the menu, the position number will	SKIP	ON
	then be skipped when you select programs with the	BAND	UHF
		FINE	ON
	POS+/- button.	AFT
		SEARCH
	If you want to skip other unwanted programs, repeat	ASM	OFF
	step 1 above to change the program number.	S-RCV

Note: you can select the skipped channel by pressing the direct channel select buttons, and the position number displayed on the screen is in red.

To restore skip a position number

Enter into the PRESET menu, Select the position number you want to restore. Press the POS+/- button to select "SKIP". Press the VOL+/- button to select "SKIP OFF".

MFT (Manual Fine Tuning)

When picture and sound's effect of a channel is poor (for example: one or two CATV channel's picture and sound are not standard), you can correct them by making use of Manual Fine Tuning (FINE).

1.Enter into PRESET menu, select the program number you want to fine-tune.

2.	Press the POS+/- button to select FINE, then press and
	hold the VOL+ or VOL- button, the channel begins

fine tuning until the optimum picture and sound is achieved. (Press VOL+ button to fine-tune upward, while VOL- button to fine-tune downward. The AFT function will be set to OFF mode automatically)

PRESET
POS	25
SKIP	OFF
BAND	UHF
FINE	ON
AFT
SEARCH
ASM	OFF
S-RCV
PRESET
POS	25
SKIP	OFF
BAND	UHF
FINE	ON
AFT
SEARCH
ASM	OFF
S-RCV

Note: if some channel’s colour or sound is abnormal, it may be that the setting of the colour or the sound system is wrong, please do adjustment according to The setting of colour and sound system (on page 10) to set the proper colour and sound system.

3. To exit the menu, press the RECALL button.

9