Palsonic 5179G owner manual External Equipment Connections, Video playback, Recording TV program

CONNECTING OTHER EQUIPMENT

External Equipment Connections

This set is incorporated with Audio & Video input and output terminals which allow direct connection to external equipments (such as VCR, Video DISC, VCD, Satellite Receiver etc.) for playing back and recording the programs. Refer to the owner’s manual of the equipment to be connected as well.

Video playback

The figure below shows how to connect the TV set to the video equipment.

Or you could use another group of AV IN terminals on the front cabinet as follows.

Note: As regards the AV input terminals, connect either the front or rear terminals but not both.

Press the "AV/TV" button on the remote controller to select AV mode, "AV" and corresponding colour system will be displayed on the screen. The picture displayed on the screen is the program played back by the video equipment.

Recording TV program

The figure below shows how to connect the TV set to the VCR

Press AV/TV button on the remote control unit to set the TV receiver to TV mode, and choose the desired channel. At this time, the program recorded is the one displayed on the screen. ( The VIDEO/AUDIO output terminals only output TV signals.)

Note: the following mis-operation should be avoided during recording.

*Press STANDBY button or set to AV mode.

*Change the current channel accidentally

19