Palsonic 5179G Other functions continued, Channel Swap, Super receiving function, Program Scan

OPERATION

Other functions (continued)

CHANNEL SWAP

Making use of CHANNEL SWAP you can reorder the programs in your favorite order.

Press the MENU button repeatedly to select and highlight SWAP icon. Press VOL +/- button to enter into CHANNEL SWAP menu.

Press POS +/- button to select "POSITION A: -"item, then input the desired channel number which you want to swap by pressing "0-9" or "--/---" button.

Press POS+/- button to select "POSITION B: -"item,press "0-9" or "--/---" button to input the channel number which you want to swap to.

Press the POS+/- button to select "EXCHANGE" item, press VOL +/- button to confirm. Then channel A and channel B’s programs are swapped.

SWAP

CHANNEL SWAP

POSITION	A: 5
POSITION	B :14
EXCHANGE	: OK

Super receiving function

Below we will describe how to make use of super receiving function.

Pressing the SUPER button on the remote controller can change the current program’s super receiving mode to ON or OFF.

Or you can press PRESET button to enter into PRESET menu, press POS+/-button to select S-RCV item, press VOL +/- button can change the current program’s super receiving mode to ON or OFF.

S-RCV	ON
PRESET
POS	22
SKIP	OFF
BAND	UHF
FINE	OFF
AFT
SEARCH
ASM
S-RCV	OFF

or ON

Note : 1) After AUTO SEARCH (ASM). all the searched programs are set to S-RCV OFF automatically 2) When receiving signals are stronger, please set to S-RCV to OFF mode

Program Scan

Press SCAN button, the TV set will scan the channels from current channel to higher channels one by one, the upper right corner of the screen will display position number, ever program will be displayed for about 2 seconds and then go on scanning until all the programs are scanned over.

Press SCAN button again, the screen will settle at the current scanned program.

7

SCAN

14

18