INSTALLATION / CONNECTIONS
Placing your sound system components | Remote control and batteries | ||||
|
|
|
|
|
|
|
|
|
|
|
|
Same distances
Optimal stereo position
Fit the batteries to match the + and - symbols in the compartment.
Batteries for remote control unit are not provided.
Please protect your environment! As batteries contain certain toxic substances they pollute the environment if not properly disposed of. Your specialised dealer will accept used batteries. Make sure the batteries are always of the same type and age, and remove them from
the remote control if you are not using it for a long period.
Installation
Plug the provided AM antenna here.
Fit the provided FM antenna here.
Plug a device like a video recorder, TV set, or minidisc, etc. here. Be sure to connect sockets and plugs of the same colour.
Push here | Fit the speaker cables. |
|
| Be sure to connect the |
|
| pair of cables (for the left |
|
| and the right speaker) so | Left speaker |
| that the marked flexes | |
| have both the same | Right speaker |
| colour (phase). |
Make sure the rating of your household electricity supply matches that shown on the back of the sound system.
Do not stack objects on top of the sound system.
Do not block the ventilation holes of the sound system.
Place the system so that air can circulate freely.
Switch devices off when connecting or disconnecting.
Do not expose the sound system to high levels of humidity and heat, to avoid the risk of fire and electric shock.
Do not connect the sound system to the power supply if you have just moved it from a cold to a warm environment. This can result in condensation inside the system and cause serious damage to the machine and cassettes. Wait around two hours to allow it to reach room temperature.
Be sure you disconnect the power supply and aerial if you will not be using the system for a long period or during a thunderstorm.
Be sure to read the precautions on page 2.
3
