TAPE
TAPE: To play back prerecorded tapes and to record tapes. 
For tape recording see page
Playing tapes
FUNCTION
PUSH
/OPEN
Winding
Select the TAPE function.
Open the tape compartment to load the tape.
Be sure to have the open part of the cassette downwards and the tie left hand spool fully wound.
Close the compartment door again, pushing it softly.
Start playback.
Start reverse playback (AR only)
CLEAR
Stop playback.
CLEAR | TUNE TUNE |
Stop playback. | Fast rewind or advance the tape. |
On the remote control select the TAPE function pressing the FUNCTION button. For tape recording see page
The tape counter resets to "0000" when a tape compartment is opened ("0000" need not be the beginning of the tape).
CD
On the machine select the CD function, by pressing the FUNCTION button repeatedly.
When the disc stops the machine shows its total time.
During playback the machine shows the current track number, and the track's play time. Please read remarks about discs on page 13.
When playing a
In case of playing the
Discs recorded by personal computer or high speed recording may not be played (or cause noise) according recording format.
It is recommended to record discs record as low speed as possible or using recordable CD for AUDIO.
Playing CD
FUNCTION
TUNE TUNE
Searching
Select the CD function.
Open the disc compartment to load a disc.
Be sure to have the disc label facing upwards.
To select a specific start track.
SET
CLEAR
Start playback.
If you want to interrupt playback briefly - and to continue.
Stop playback.
TUNE TUNE
To search for a particular point
on the disc reverse or forward. (hold pressed the button more than 500ms)
9
