Palsonic PRC-241 instruction manual Cd Programmed Play, Tips For Good Radio Reception

CD PROGRAMMED PLAY

This function allows the tracks to be played in a programmed sequence.

1.Press the Program Button (#21) once. The CD Program Indicator (#27) will flash and the LED Track Display (#20) will display "0" and blink.

2.Press the CD Skip Forward Button (#17) or CD Skip Backward Button (#16) to select the song to be programmed.

3.Press the Program Button (#21) again to store selection. The CD Program Indicator (#27) will flash and the LED Track Display (#20) will go to "0" and blink.

4.Press the CD Skip Forward Button (#17) or CD Skip Backward Button (#16) to select the next song to be programmed and press the Program Button to store selection.

5.You may repeat steps #1- #4 to program as many as 19 tracks. If you attempt to program more than 19 tracks, the LED Track Display (#20) will display "--" instead.

6.To check the programmed tracks, press Program Button (#21). The LED Track Display (#20) will display the track number. Press Program Button (#21) more times to check the following tracks.

7.Press CD Play Button (#23) to start playing in the programmed sequence.

8.To cancel programmed play, press the CD Stop Button (#22).

RADIO RECEPTION

1.Set the Function Selector (#1) to "RADIO" position.

2.Set the Band Selector (#6) to "AM" or "FM" for the desired radio band.

3.Adjust the Tuning Knob (#7) to select the desired radio station.

4.Adjust the Volume Control (#14) to obtain the desired sound level from the Dynamic Speakers (#15).

5.When you wish to turn off the Radio, set the Function Selector (#1) to the "TAPE" position.

TIPS FOR GOOD RADIO RECEPTION

1.To insure maximum FM tuner sensitivity, the Telescopic Antenna (#2) should be fully extended and rotated to obtain the best possible reception. The FM Stereo Indicator (#28) will light steadily when a stereo program is being received.

2.When tuning in AM reception, be sure to place the unit in a vertical position. To insure best AM sensitivity, try repositioning the unit until the best reception is obtained.

CASSETTE RECORDER OPERATION

1.Open the Cassette Door (#24) and insert a pre-recorded cassette tape with the exposed tape facing upwards. Close the Cassette Door (#24).

2.Press the Cassette Play Button (#19) and adjust the Rotary Volume Control (#14) to obtain the desired sound level.

3.Press Cassette Pause Button (#13) to suspend play. Press same button again to resume.

4.Press the Cassette Fast Forward Button (#11) or the Cassette Rewind Button (#10) to rapidly advance or rewind the tape.

5.Press the Cassette Record Button (#8) to record from either Radio, Dynamic Built-in Condenser (#29) or CD. Use Function Selector (#1) to choose your signal source accordingly.

6.Press the Cassette Stop Button (#12) to stop operation.

5