Memorizing the Channels & Programme Edit
ATV manual tuning - analogue only -
1
2
3
Use the Manual Tuning operation if desired channels can not be preset
by Auto Tuning or if you would like to preset channels to specific
position numbers one by one.
From ATV Manual Tuning setting menu, press 6or5 to select
an item, press 3or4 to set the item as shown below.
A. Storage To: Position selection. Press 3or4 button to select
the position you want to store.
B. System: Sound system selection. If certain channel’s sound is
abnormal, it may be that the sound system setting is wrong. In
this case, select another sound system.
C. Current CH: Selects current channel using 3or4.
D. Search: Channel search operation.
Press 4to search up the band or3 to search down the band.
Press 3or4repeatedly until your desired channel is displayed.
E. Fine-Tune: Manual fine tuning.
Press 3or4until better picture and sound are obtained.
F. Frequency: Shows current frequency, it can not be adjusted.
(During the process, you can press EXIT to exit the operation.)
In Channel menu, press 6or5 to select ATV Manual Tuning,
then press4or OK to access the setting menu.
SELECT MOVE MENU RETURN
Programme Edit
File System
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
ATV Manual Tuning
Storage To 11
SELECT
System
Current CH
Search
Fine-Tune
Frequency
SAVE
EXIT
C-02
BG
445.25 MHz
Press RED button to save your settings.
If a channel is not already labeled, you can label the channel to make it
easier to identify. You can also relabel a channel that is already labeled.
Programme Edit
1
TV S-03
2
TV C-42
3
TV S-04
4
TV C-04
NAMEDEL MOVE SKIP Fav.List
SELECT MOVE MENU RETURN
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
File System
4
Within the programme list, press 6or5 to select a channel you
want to label, press GREEN button to start to label. A cursor
appears at the edit field.
Use 6or5 to select a character, use 3or4 to move the cursor.
When finished, press OK to confirm.
The maximum length of label is 5 characters.
1Press MENU. Press 3or4to select Channel menu, press 6
to access.
2
3
Press 6or5 to select Programme Edit, press 4 or OK to
open the Programme Edit menu and a programme list is
displayed.
5Repeat the above steps to label more channels.
Note: The labels of DTV channels are automatically assigned and
cannot be changed by user.

Adding or changing a channel label

- analogue only -
ChannelLockPicture OptionTimeSound
ChannelLockPicture OptionTimeSound
20