Palsonic TFTV665UBK Changing Channels, Selecting Input Source Signal, Selecting a Menu Language

Basic Operations (continued)

Changing Channels

Using the Channel Buttons (CH+ or CH-)

Press the CH+ or CH- to change channels.

When you press the CH+ or CH-, the unit changes channels in sequence. You will see all the channels that the unit has memorised. You will not see channels that were skipped.

Direct Accessing Channels

Press the number buttons to go directly to a channel.

To select a one-digit channel: input the channel number by pressing the 0-9 number buttons to display X--, and wait for some seconds the unit goes to the selected channel.

To select a two-digit channel: input the channel number by pressing the 0-9 number buttons to display XX-, and wait for some seconds the unit goes to the selected channel.

To select a three-digit channel: input the channel number by pressing the 0-9 number buttons to display XXX, and wait for some seconds the unit goes to the selected channel.

Note:

"X" is 0-9 number.

When you use the number buttons, you can directly select channels that were skipped.

Using the RETURN button

Press this button to switch between the current channel and the previous channel.

Selecting Input Source Signal

1 Press the INPUT button to display the INPUT menu.

2 Press	or	to select a desired input source.
3 Press	or	to confirm.

VGA ------ Select signal from VGA (D-SUB) jack.

HDMI ------- Select signal from HDMI terminal.

TV -------- Select TV signal.

AV1 ------- Select signal from AV IN 1 terminals.

AV2 ------ Select signal from AV IN 2 terminals.

SVIDEO ----- Select signal from S-Video terminal.

YPBPR1 ----- Select signal from COMPONENT IN 1 terminals.

YPBPR2 ------ Select signal from COMPONENT IN 2 terminals.

Selecting a Menu Language

1 Press MENU to display the menu main page.

2 Press	or	repeatedly to select SYSTEM menu.
Press	to access the menu.
3 The [OSD LANGUAGE] item will be highlighted automatically.
4 Press	or	to select a desired OSD language.

5 Press MENU button repeatedly to exit the menu.

INPUT

VGA

HDMI

TV

AV1

AV2

SVIDEO

YPBPR1

YPBPR2

:OK

SYSTEM

OSD H.POSITION	50
OSD V.POSITION	50
OSD HALFTONE	50
OSD DURATION	15 SECONDS

: SEL : ADJ MENU : EXIT

15