Compatible iPod
Name | Memory Size |
iPod nano | 2GB, 4GB, 8GB |
2nd generation (aluminum) |
|
|
|
iPod | 60GB, 80GB |
5th generation (video) |
|
iPod | 30GB |
5th generation (video) |
|
|
|
iPod nano | 1GB, 2GB, 4GB |
1st generation |
|
iPod | 40GB, 60GB |
4th generation (color display) |
|
|
|
iPod | 20GB, 30GB |
4th generation (color display) |
|
iPod | 40GB |
4th generation |
|
|
|
iPod | 20GB |
4th generation |
|
iPod mini | 4GB, 6GB |
Note:
Compatibility depends on the software version of your iPod.
|
|
|
| Recording from an iPod |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
|
|
1 | Press [4, REW/ ] or [4, / FF] to select the | |||
| desired track for recording. | |||
2 | Press [¶, REC] on the main unit to start recording. |
Note:
Pressing [6, OPTION] will pause iPod’s playback, but the recording function will continue.
Press [7, CLEAR] to stop the recording.
iPod is a trademark of Apple, Inc., registered in the U.S. and other countries.
MUSIC PORT | Changing the main unit and |
| remote control mode |
|
|
The remote control and main unit are factory set to “REMOTE 1” mode.
If your remote control affects other equipment during operation, you can switch to operate in “REMOTE 2” mode.
To switch to “REMOTE 2” mode
1 | While pressing and holding [MUSIC PORT] on the main |
| unit |
| Press and hold [2] until “REMOTE 2” appears on |
| the main unit display. |
2 | Press and hold [ENTER] and [2] for at least 2 |
seconds.
The main unit and remote control are now set to operate in “REMOTE 2” mode.
To return to “REMOTE 1” mode
Perform steps 1 and 2 above but use [1] instead of [2] for both steps. (“REMOTE 1” appears on the main unit during step 1.)
The remote control cannot work with the main unit if their modes are different.
“REMOTE 1” or “REMOTE 2” appears on the main unit display when you operate the remote control.∗
∗If “REMOTE 1” appears (The main unit is in “REMOTE 1” mode.)
Press and hold [ENTER] and [1] on the remote control for at least 2 seconds.
If “REMOTE 2” appears (The main unit is in “REMOTE 2” mode.)
Press and hold [ENTER] and [2] on the remote control for at least 2 seconds.
ENGLISH
DANSK
FRANÇAIS
LANG - 4
LANG - 5
RQTV0200
17
RQT8043