Panasonic SC-AK750, 377, Stereo System Timer, Setting the clock, Using the play or record timer

Timer

				Setting the clock
ENGLISH
					CLOCK		˚ PLAY		˚ REC
	This is a 12-hour clock.
	1	Press [CLOCK/TIMER] to select “CLOCK”.
		Each time you press the button:
	2					Original display
		(					)
			Within 8 seconds or so
		Press [4, REW/				] or [¢,		/ FF ] to set the time.
	3	Press [CLOCK/TIMER] to finish setting the time.
	Displaying the clock
	Press [CLOCK/TIMER] once when the unit is on or in standby
DANSK	mode.
	The time is displayed for a few seconds.

Note:

Reset the clock regularly to maintain accuracy.

Using the play or record timer

You can set the timer to come on at a certain time to wake you up (play timer) or to record from the radio or the external equipment (record timer).

Play timer and record timer cannot be used together.

Turn the unit on and set the clock.

FRANÇAIS		Timer			Action
		Play timer			Prepare the music source you want to listen to;
					cassette, disc number (1~5), radio or music port
					source, and set the volume.
		Record			Check the cassette’s erasure prevention tabs
		timer			(\ page 10), insert the cassette and tune to the
					radio station (\ page 11~13), select the music port
					source (\ page 15) or iPod (\ page 16).
	1		Press [CLOCK/TIMER] to select the timer function
			Each time you press the button:
- 4					CLOCK		˚ PLAY			˚ REC
						Original display
LANG			˚PLAY : to set the play timer
			˚REC	: to set the record timer
			(Proceed to the next step					within 8 seconds			)
	2		Press [4, REW/			] or [¢,			/ FF ] to set the
			starting time.

Start time

Play timer indicator Record timer indicator

- 5	3	Press [CLOCK/TIMER] to confirm.
LANG
	4	Repeat steps 2 to 3 to set the finishing time.
		Finish time
	RQTV0200	1

14

To activate the timer
5	Press and hold [– ˚PLAY/REC] to turn on your desired
	timer.
		˚ PLAY		˚ REC
6			no display (off)
	Press [y] to turn off the unit.

The unit must be off for the timers to operate.

Other basic operations

To	Action
change the	Repeat steps 1 to 4 and 6 (\ see left and
settings	above).
change the	1) Press and hold [– ˚PLAY/REC] to clear the
source or	timer indicator from the display.
volume	2) Make changes to the source or volume.
	3) Perform steps 5 to 6 (\ see above).
check the	Press [CLOCK/TIMER] repeatedly to select
settings	˚PLAY or ˚REC.
cancel	Press and hold [– ˚PLAY/REC] to clear the
	timer indicators from the display.

If you use the unit after the timers are set

After use, check that the correct tape/disc are loaded before turning the unit off.

Note:

•The play timer will start at the preset time with volume increasing gradually to preset level.

•The record timer will start 30 seconds before the set time with the volume muted.

•The timer comes on at the set time every day if the timer is on.

•The unit must be in the standby mode for the timer to function.

•If you turn the unit off and on again while a timer is functioning, the fi nish time setting will not be activated.

•Regardless of the channel selection during timer setting, the XM satellite radio always comes on with the previously selected channel.

•If MUSIC PORT is selected as the source when the timer comes on, the system turns on and engages MUSIC PORT as the source. If you wish to play back or record from the portable audio equipment, just activate the equipment’s play mode and increase the volume. (See the portable audio equipment’s instruction manual.)

Using the sleep timer

This function enables you to turn off the unit automatically after the set time.

Press [SLEEP] to select your desired time.

SLEEP 30 SLEEP 60 SLEEP 90

SLEEP OFF SLEEP 120

Sleep timer indicator

To cancel

Press [SLEEP] to select “SLEEP OFF”.

Changing the remaining time

Press [SLEEP] to show the remaining time and press [SLEEP] again to select your desired time.

Note:

•The play and sleep timer or the record and sleep timer can be used together.

•The sleep timer always has priority. Be sure not to overlap timer settings.

•The sleep timer turns off when you perform the record function.

RQT8043