FM/AM radio
TUNER / | Manual tuning | |
| BAND | |
1 | Press [TUNER/BAND] to select “FM” or “AM”. | |
2 | Press [PLAY MODE] to select “MANUAL”. | |
3 | Press [4, REW/ ] or [¢, / FF] to select the | |
| frequency of the required station. |
“ ” is displayed when a stereo FM broadcast is being received.
To tune automatically
Press and hold [4, REW/] or [¢, / FF] until the frequency starts changing rapidly. The unit begins auto tuning, stopping when it fi nds a station.
•Auto tuning may be interrupted when there is excessive interference.
•To cancel auto tuning, press [4, REW/] or [¢, / FF ] once again.
To improve FM sound quality
Press and hold [PLAY MODE] to display “MONO”.
To cancel
Press and hold [PLAY MODE] again until “MONO” disappears.
•MONO is also canceled if the frequency is changed.
•Turn off “MONO” for normal listening.
TUNER
FM allocation setting
FM/AM/XM
By main unit only
This system can also receive FM broadcasts allocated in 0.1 MHz steps.
To change the step to 0.1 MHz
1 | Press and hold [TUNER, FM/AM/XM] when “FM” is |
| selected. |
| After a few seconds the display changes to a fl ashing |
| display of the current minimum frequency. |
2 | Continue to hold down [TUNER, FM/AM/XM]. |
• When the minimum frequency changes, release the button. To return to the original step, repeat the above steps.
• After changing the setting, previously preset frequency will be cleared.
| TUNER / | Memory preset |
| |
| BAND |
| ||
20 FM and 15 AM stations can be preset. | ENGLISH | |||
Preparation | ||||
Press [TUNER/BAND] to select “FM” or “AM”. | ||||
|
|
| ||
|
| Automatic presetting |
| |
1 | Tune to the frequency where presetting is to begin. |
| ||
2 | Press and hold [PROGRAM] to start presetting. |
| ||
The tuner presets all the stations it can receive into the | DANSK | |||
channels in ascending order. When fi nished, the last station | ||||
memorized is tuned in. | ||||
| ||||
|
| Manual presetting |
| |
1 | Press [PLAY MODE] to select “MANUAL”. |
| ||
2 | Press [4, REW/ ] or [¢, / FF ] to tune to the |
| ||
| required station. |
| ||
3 | Press [PROGRAM]. | FRANÇAIS | ||
4 | Press the numeric buttons to select a channel. | |||
| For channels 10 to 20 press [h10], then the two digits. |
The station occupying a channel is erased if another station is preset to that channel.
Selecting a preset station
Press the numeric buttons to select the channel.
OR |
|
| - 4 | |
1 | Press [PLAY MODE] to select “PRESET”. | |||
LANG | ||||
2 | channel. | / FF ] to select the | ||
| Press [4, REW/ ] or [¢, |
|
LANG - 5
RQTV0200
11
RQT8043