Raven EDGE
9.Configure additional PassThru settings.
a.On the left, under the GROUPS heading, select PassThru.
Figure 2-16: AceManager : PassThru
b.For *PTREFRESH, enter a value of 15.
c.For *RESETPERIOD, enter a value of 6.
10. Save the configuration settings.
Click the Write button on the tool bar of AceManager and wait for the message “Write Successful” to appear in the status bar.
11.Configure the Raven for your equipment.
a.Make any appropriate changes to the serial port parameters to match your equipment. These changes are made under the group Serial.
Caution: Do not under any circumstances change the *MODEMHISPEED setting from the template configuration, the only recommended setting to change is the S23 setting.
b.Follow the directions above to Write the changes to the modem.
12.Reset the Raven.
a.Click the Disconnect button.
b.Press the modem Reset button on the front of the modem.
c.Wait until the modem REG indicator is lit.
d.Disconnect the Raven from your computer.
|
|
|
|
|
|
|
115 |
|
|
|
|
| 20070914 |
|
|
|
