Raven EDGE
Figure 1-6: AceManager : PPP/Ethernet
*DHCPSERVER=n
•Act as a DHCP server for any Ethernet device connecting to the Raven. DHCP (Dynamic Host Configuration Protocol) allows one device, the DHCP server, to provide dynamic IP addresses to any other device which requests them.
•n=1 : Enabled. The modem will act as the primary DHCP server for the network.
•n=2 : Enabled if no other DHCP server is detected (default). If another DHCP server is detected on the network, the Raven will not send out replies to DHCP requests.n=0 : Disabled. The Raven X will not send out replies to DHCP requests.
Tip: For PPPoE, set *DHCPSERVER=0.
*HOSTAUTH=n
Host Authentication Mode: Use PAP or CHAP to request the user login and password during PPP or CHAP negotiation on the host connection. The username and password set in *HOSTUID and *HOSTPW will be used.
•n=0 : Disable PAP or CHAP request (Default).
•n=1 : PAP and CHAP.
•n=2 : CHAP
Tip: For PPPoE, set *HOSTAUTH=1 or *HOSTAUTH=2.
|
|
|
|
|
|
|
91 |
|
|
|
|
| 20070914 |
|
|
|
