
Configuration Commands
*PTINIT=string
Any AT Command string to be passed to the OEM module before entering PASSTHRU mode, e.g. AT&S1V1, etc.
•string=AT command(s)
*PTREFRESH=n
Number of minutes of inactivity in PASSTHRU mode to resend the *PTINIT string to the hardware module.
•n=0 : Disabled
•n=1‐255 minutes
*RESETPERIOD=n
In PASSTHRU mode, modem will be reset after this period if no data has been sent or received. Value is in hours.
•n=0 : Disabled
•n=1‐255 hours
SMTP
SMTP (Simple Mail Transfer Protocol) is the de facto standard for email transmission across the Internet. The Raven can send messages using SMTP if it has been configured to use a mail server.
Note: You cannot send an Email with your Raven unless the Email server you have configured allows your Raven as a relay host. Talk to your network administrator to ensure you can send email through the email server using your Raven.
SMS (Short Message Service) is another way to send messages via the cellular network. Most SMS commands require the modem to be in PassThru mode.
Note: SMS may not be supported by your account with your cellular carrier.
|
|
|
|
|
|
|
Rev 3.0B Feb.08 |
|
|
|
|
| 94 |
|
|
|