Raven EDGE
Figure 1-5: AceManager : Dynamic IP
*DOMAIN=name
Domain (or domain zone) of which the Raven is a part. This value is used during name resolutions if a fully qualified name is not provided and also for DNS updates. This value can be up to 20 characters long.
•name=domain name (i.e. eairlink.com)
If *DOMAIN=eairlink.com, then when ATDT@remote1 is entered, the fully qualified name remote1.eairlink.com will be used to perform a DNS query to resolve the name to an IP address.
Tip: Only letters, numbers, hyphens, and periods can be used in a domain name.
*IPMANAGERn=[name][IP address]
Sets a domain name or IP address to send IP change notifica‐ tions to. Up to two independent IP Manager servers can be set, using either AT*IPMANAGER1 or AT*IPMANAGER2. Updates to a server can be disabled by setting that entry to nothing (for example, “AT*IPMANAGER1=”).
•n=1 : First IP Manager server.
•n=2 : Second IP Manager server.
•name=domain name
*IPMGRKEYn=key
Sets the 128‐bit key to use to authenticate the IP update notifi‐ cations. If the keyʹs value is all zeros, a default key will be used. If all the bytes in the key are set to FF, then no key will be used (i.e. the IP change notifications will not be authenticated). AT*IPMGRKEY1 is used to set the key to use with AT*IPMANAGER1, while AT*IPMGRKEY2 is used to the key with AT*IPMANAGER2.
•n=1 : First IP Manager server.
|
|
|
|
|
|
|
89 |
|
|
|
|
| 20070914 |
|
|
|
