Raven EDGE
2. Connect the modem to your computer
Using the RS232 cable, connect the modem to the computer and apply power to the modem.
3. Erase the internal memory
The Raven should have the internal memory erased to bring the modem to a known starting point without any configu‐ ration or account programming.
a.Start Modem Doctor.
b.Select Erase the modemʹs non‐volatile data.
Figure 2-3: Modem Doctor
c.Select Serial from the Interface options and select the Port on your computer to which the Raven is connected. Leave the Baud setting at 115200.
Figure 2-4: Modem Doctor: Interface
d.Click the Next button and press the modem Reset button when prompted. The modem Reset button is located on the front panel of the modem and can be accessed with the point of a pen or similar tool.
|
|
|
|
|
|
|
111 |
|
|
|
|
| 20070914 |
|
|
|
