Configuration Commands
Figure 1-14: AceManager : EDGE/HSDPA
*NETAPN=apn
Easy entry of the APN. If left blank, the modem will attempt to use the default subscriber value as defined by the account.
•apn=access point name
+CGQMIN
Minimum Acceptable Quality of Service Profile. Change should be at carrierʹs request. Normally not required to be changed.
+CGQREQ
Set Quality of Service Profile. Change should be at carrierʹs request. Normally not required to be changed.
+COPS=mode,[format][,oper]
Manually specify an operator. Refer also to *NETOP.
•mode=0 : Automatic ‐ any affiliated carrier [default].
•mode=1 : Manual ‐ use only the operator <oper> specified.
•mode=4 : Manual/Automatic ‐ if manual selection fails, goes to automatic mode.
•format=0 : Alphanumeric (ʺnameʺ) (G3x10 must use this format).
•format=2 : Numeric
•oper=”name”
|
|
|
|
|
|
|
Rev 3.0B Feb.08 |
|
|
|
|
| 106 |
|
|
|
