A: Configuration Commands | A |
•Info (information)
•Status
•Common
•Logging
•Telemetry/Addr List
•Edge/HSDPA
The configuration commands (AT commands) in this chapter are arranged according to their placement in AceManager.
The commands available in AceManager will depend of the model number of your Raven and, in some cases, the version of the ALEOS firmware installed.
Note: Some commands can only be configured using a terminal emulation and typed AT commands. Some commands also require PassThru mode.
Tip: You can use a fully qualified domain name instead of an IP address for most configuration options calling for an IP address if your Raven is configured to use DNS. DNS settings frequently come directly from your cellular provider while your Raven is registering on the cellular network and receiving it’s IP address.
Info (information)
The commands in the “Info” group have read‐only param‐ eters. They only provide information about the modem. Some of the information displayed in this group does not correspond directly to AT commands.
|
|
|
|
|
|
|
Rev 3.0B Feb.08 |
|
|
|
|
| 78 |
|
|
|
