SNMP : Simple Network Management Protocol

Trap Destination

*SNMPTRAPDEST needs to be set with the destination IP and port. If either are set to zero or empty, SNMP traps are disabled.

Note: Traps are sent out according to the SNMP security level (i.e. if the security level is 2, traps will be authenticated and encrypted). Currently, the only trap supported is LinkUp.

Community String

The community string can be configured using *SNMPCOM‐

MUNITY. The default is “public”.

SNMP MIB Definition Sample

AIRLINK-MIB DEFINITIONS ::= BEGIN

IMPORTS

ObjectName FROM SNMPv2-SMI

MODULE-COMPLIANCE FROM SNMPv2-CONF;

org OBJECT IDENTIFIER ::= { iso 3 } dod OBJECT IDENTIFIER ::= { org 6 } internet OBJECT IDENTIFIER ::= { dod 1 } private OBJECT IDENTIFIER ::= { internet 4 } enterprises OBJECT IDENTIFIER ::= { private 1 }

airlink OBJECT IDENTIFIER ::= { enterprises 20542 } general OBJECT IDENTIFIER ::= { airlink 1 } common OBJECT IDENTIFIER ::= { airlink 2 } status OBJECT IDENTIFIER ::= { airlink 3 }

gps OBJECT IDENTIFIER ::= { airlink 4 }

-- GENERAL -- phoneNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (10)) MAX-ACCESS read-only STATUS current

::= { general 1 }

deviceID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current

::= { general 2 }

 

 

 

 

 

 

 

Rev 3.0B Feb.08

 

 

 

 

 

72

 

 

 

Page 76
Image 76
Sierra Raven EDGE manual Snmp MIB Definition Sample, Trap Destination, Community String