Configuration Commands
Information Displayed in AceManager without AT Commands Listed
•Versions of ALEOS, internal hardware, boot, and MSCI: Versions of internally configured hardware and software.
Status
Most of the commands in the “Status” group have read‐only parameters and provide information about the modem. The Status Group has more fields that can be displayed on most screens. You can either resize your window or use the scroll bar on the side to display the remainder.
Note: If there is no current network IP address, 0.0.0.0 may be displayed.
Rev 3.0B Feb.08
Figure 1-2: AceManager : Status
*HOSTMODE?
The current host mode (AT, PPP, UDP, etc.). If the Raven is not in AT mode, telnet into the modem to execute this command.
*NETERR?
The EDGE or GPRS network bit error rate.
*NETIP?
The current IP address of the modem reported by the internal module, generally obtained from your cellular provider. This is the address can contact the Raven from the Internet.
80
