TROUBLESHOOTING
Ice and Water
Ice maker is not
producing ice
Water filter
Ice maker arm is up.
Household water supply is not reaching water valve.
Copper tubing has kinks.
Water pressure is too low.
Check freezer temperature.
Ice bin is not installed properly. Improper water valve was installed.
Water filter needs to be replaced.
Confirm ice maker arm is down. See Automatic Ice
Maker page 13.
See Connecting the Water Supply pages 4 and 5.
Turn off water supply and remove kinks.
If kinks cannot be removed, replace tubing.
Water pressure must be between 35 to 100 pounds per square inch to function properly.
A minimum pressure of 35 pounds per square inch is recommended for refrigerators with water filters.
See Temperature Controls page 8 to adjust controls. Freezer must be between 0° to 2° F
See Ice Storage Bin page 12.
See Connecting the Water Supply pages 4 and 5.
due to improper installation or water connection.
If filter is not available, replace with bypass filter.
indicator | light is |
| ||
red |
|
|
| Filter indicator sensor needs to be reset. |
Ice forms | in inlet | Water pressure is too low. | ||
tube to | ice | maker |
| |
|
|
|
| Saddle valve not open completely. |
|
|
|
| Freezer temperature is too high. |
Refrigerator | is | Plastic tubing was used to complete | ||
leaking | water | water connection. |
Improper water valve was installed.
See Water Filter page 16.
See Filter Status Indicator Light page 15.
Water pressure must be between 35 to 100 pounds per square inch to function properly.
A minimum pressure of 35 pounds per square inch is recommended for refrigerators with water filters.
Open saddle valve completely.
See Temperature Controls page 8. Freezertemperature should be between 0° to 2° F
The manufacturer recommends using copper tubing for installation. Plastic is less durable and can cause
leakage. The manufacturer is not responsible for property damage due to improper installation or water connection.
See Connecting the Water Supply pages 4 and 5. Self- piercing and 3/,,,saddle valves cause low water pressure and may clog the line over time. The
manufacturer is not responsible for property
damage due to improper installation or water connection.
continued...
30