. If tube end is damaged, cut off %" before reconnecting.
If leaking occurs, reconnect the line.
3.Close door&
4.Remove top hinge covers by removing Phillips screws.
5.Unscrew J5_;,, hex head screws from top hinges.
6, For ice and | water | ..... | |
dispensing | models | onmy: | |
Detach main | wire | connector | |
harness. |
|
|
|
Do not remove | screw | ||
connecting | green | ground | |
wire,
,To detach main wire harness, use a fiat blade tool or fingernail to press
junction point between two connectors to release.
7.Remove top hinges along with doors.
8. Remove bottom hinges with a 3/8"hex head driver.
Connecting the Water Supply
(select models)
Replacing the Doors
•To replace the doors, follow the steps in Doorand Hinge Removal in reverse order.
IMPORTANT: If water line tube end is damaged, cut off %" before reconnecting.
