Touch Temperature Controls
The controls are located at the top front of the refrigerator compartment.
Controm
Initial Control Settings
After plugging the refrigerator in, set the controls.
• | Pressing | the | • | or • | pads adjusts the controls to |
| the desired | setting. |
| ||
• | Set the | freezer | control | on/4. | |
Adjusting the Controls
24 hours after adding food, you may decide that one or both compartments should be colder or warmer. If so, adjust the control(s) as indicated in the Temperature Control Guide table below. See page 19 for instructions on checking compartment temperature.
•Except when starting the refrigerator, do not change either control more than one number at a time.
•Allow 24 hours for temperatures to stabilize.
Temperature Control Guide
Refrigerator too warm Set the refrigerator control to next higher number by
pressing the • pad.
• | Set the | refrigerator | control | on/4. |
• | Let the | refrigerator | run at | least 8 to 12 hours before |
| adding | food. |
|
|
Warm Cabinet Surfaces
At times, the front of the refrigerator cabinet may be warm to the touch. This is a normal occurrence that
helps prevent moisture from condensing on the cabinet. This condition will be more noticeable when
you first start the refrigerator, during hot weather and after excessive or lengthy door openings.
Refrigerator too cold
Freezer too warm
Freezer too cold
Turn refrigerator OFF
Set the refrigerator control to next lower number by pressing the • pad.
Set the freezer control to next higher number by pressing the • pad.
Set the freezer control to next lower number by pressing the • pad. Press the freezer or refrigerator • pad until a dash
