23
PREPARATION
Battery
Before using the battery, fully charge it in the
AC adapter.
We recommend that you keep a spare battery
with you whenever you use the battery to run
the camera-recorder.
Charging time Continuous recording time
1Align the battery with the “” marking on
the AC adapter, place it flat, and slide it in
the direction shown below.
OBefore doing this, disconnect the DC cord
from the AC adapter as the battery cannot
be charged if it is connected.
2Connect the AC cord to the power outlet.
OThe POWER lamp and CHARGE lamp on
the AC adapter light, and charging begins.
OIf the CHARGE lamp does not light when
the battery is placed in the AC adapter,
remove the battery and place it in the
adapter once again.
3When the battery has been charged, the
CHARGE lamp on the AC adapter goes off.
4Slide the battery, and remove it.