Setup menu list

SCENE FILE screen

Item

Display

mode

Description of settings

CARD READ/

(Camera)

Reads and writes scene files on the SD Memory Card.

WRITE

 

READ: Reads scene files (all scenes, F1 to F6) saved on the SD Memory Card

 

 

 

after setting values are selected.

 

 

WRITE: Saves current scene file setting values (for all scenes, F1 to F6) on the

 

 

 

SD Memory Card.

 

 

NO:

Returns to the last screen.

LOAD/SAVE/

(Camera)

LOAD:

Loads the scene file settings which is saved by this camera.

INIT

 

SAVE: Saves the changed scene file settings.

 

 

INITIALIZE: The settings of the scene file selected with the SCENE FILE dial

 

 

 

are returned to the factory settings.

 

 

NO:

Returns to the last screen.

SYNCRO

(Camera)

Adjusts the synchro scan shutter speed used for shooting images on a TV

SCAN

 

screen, etc.

 

 

Holding the Operation lever toward the or will cause the values to change at

 

 

a faster rate.

 

 

60P/60i:

 

 

1/60.0…1/249.8 (Factory default setting is 1/48.0)

 

 

30P:

 

 

 

 

 

1/30.0…1/48.0…1/249.8

 

 

24P:

 

 

 

 

 

1/24.0…1/48.0…1/249.8

DETAIL LEVEL

(Camera)

Adjusts the level of the image outline correction (in the horizontal and vertical

 

 

directions).

 

 

- 7…0…+ 7

V DETAIL

(Camera)

Adjusts the level of outline correction in the vertical direction.

LEVEL

 

- 7…0…+ 7

DETAIL

(Camera)

Adjusts the level of noise reduction of the detail signal.

CORING

 

- 7…0…+ 7

 

 

Set to – for a clearer image. Noise increases slightly.

 

 

Set to + to reduce noise.

CHROMA

(Camera)

Adjusts the chroma level.

LEVEL

 

- 7…0…+ 7

CHROMA

(Camera)

Makes fine adjustments to the chroma phase.

PHASE

 

- 7…0…+ 7

COLOR TEMP

(Camera)

Makes fine adjustments to the color temperature (after white balance Ach

Ach

 

adjustment).

 

 

- 7…0…+ 7

COLOR TEMP

(Camera)

Makes fine adjustments to the color temperature (after white balance Bch

Bch

 

adjustment).

 

 

- 7…0…+ 7

MASTER PED

(Camera)

Adjusts the master pedestal (black level of the image) as the basis for images.

 

 

- 100…0…+ 100

A.IRIS LEVEL

(Camera)

Sets the desired AUTO IRIS level.

 

 

- 10…0…+ 10

 

 

 

 

 

indicates the factory setting.

86

Page 6
Image 6
Panasonic AG-HMC150 manual Scene File screen