Panasonic AG-HMC150 manual USER3, Index Focus, Assist, Wfm, Wave, Vector, Lcd Rev, Lcd Bl

SW MODE screen (continued)

Item	Display		Description of settings
	mode
USER3	(Camera)	Assigns a function to the USER3 button.
	(PB)	The setting contents are the same as USER1.
		INDEX
FOCUS	(Camera)	Assigns a function to the FOCUS ASSIST button.
ASSIST		EXPANDED: The central part of the screen will be enlarged by a factor of about
			4 in the vertical direction and by a factor of about 6 in the horizontal
			direction.
			“EXPANDED” is displayed on the screen during the expanded
			display.
		GRAPH:Displays a frequency distribution graph at the top right in the viewfinder
		and LCD monitor.
		BOTH: Magnifies the center portion of the image and displays a frequency
		distribution graph.
		(The frequency distribution graph is displayed on either the viewfinder or
		the LCD monitor.)
WFM	(Camera)	Switches the waveform display that appears when the WFM button is pressed.
		WAVE:	Displays as a waveform. Each time the button is pressed the
			setting changes in this order: OFF → WAVE (waveform) → OFF.
		VECTOR:	Displays as a vector. Each time the button is pressed the setting
			changes in this order: OFF → VECTOR → OFF.
		WAVE/VECTOR:Each time the button is pressed the setting changes in this order:
			OFF → WAVE (waveform) → VECTOR → OFF.
LCD	(Camera)	Assigns a function to the LCD button.
	(PB)	LCD REV:	Flips the LCD image vertically and horizontally.
		LCD BL:	Switches the brightness of the LCD backlight.
		• The backlight brightness setting registered in LCD BL will remain stored
		even if the function allocated to the LCD button is changed.
				indicates the factory setting.

Menu

89