Setup menu list (continued)
SW MODE screen
Item | Display |
|
| Description of settings | ||
mode |
|
| ||||
|
|
|
|
|
| |
|
|
|
|
| ||
MID GAIN | (Camera) | Sets the gain value assigned to the M position of the GAIN switch. | ||||
|
| 0dB, 3dB, 6dB, 9dB, 12dB | ||||
HIGH GAIN | (Camera) | Sets the gain value assigned to the H position of the GAIN switch. | ||||
|
| 0dB, 3dB, 6dB, 9dB, 12dB | ||||
ATW | (Camera) | Sets the operation of the ATW (Auto Tracking White) function assigned to the | ||||
|
| WHITE BAL switch. When the ATW function is allocated to the AUTO/MANUAL | ||||
|
| switch or USER button, the operation remains effective. | ||||
|
| Ach: Activates the ATW function when the WHITE BAL switch is set to A. | ||||
|
| Bch: | Activates the ATW function when the WHITE BAL switch is set to B. | |||
|
| PRST: | Activates the ATW function when the WHITE BAL switch is set to PRST. | |||
|
| OFF: | Deactivates the ATW function. | |||
HANDLE | (Camera) | Sets the zoom speed assigned to each setting position of the HANDLE ZOOM | ||||
ZOOM |
| switch. |
|
|
|
|
|
| L/OFF/H: Sets LOW (low speed)/OFF/HIGH (high speed) to the 1/2/3 position. | ||||
|
|
| (Zoom is disabled when set to OFF.) | |||
|
| L/M/H: Sets LOW (low speed)/MID (medium speed)/HIGH (high speed) to the | ||||
|
|
| 1/2/3 position. | |||
|
| L/OFF/M: Sets LOW (low speed)/OFF/MID (medium speed) to the 1/2/3 position. | ||||
|
|
| (Zoom is disabled when set to OFF.) | |||
IRIS DIAL | (Camera) | Sets the rotation direction and the aperture control of the IRIS dial. (In MANUAL | ||||
|
| IRIS mode) |
|
|
| |
|
| DOWN OPEN:The iris opens when the IRIS dial is turned downward. | ||||
|
| UP OPEN: | The iris opens when the IRIS dial is turned upward. | |||
USER1 | (Camera) | Selects the function assigned to the USER1 button. | ||||
| (PB) | SPOTLIGHT: Switches auto iris control for the spotlight on or off. | ||||
|
| BACKLIGHT: Auto iris control for the backlight compensation. (Page 43) | ||||
|
| BLACKFADE: Blackfade (Page 43) | ||||
|
| WHITEFADE: Whitefade (Page 43) | ||||
|
| ATW: |
| Switches the ATW function on or off. | ||
|
| ATW LOCK: Fixes the white balance value when the button is pressed during | ||||
|
| GAIN:18dB: | ATW. Press again to perform ATW. | |||
|
|
|
|
| ||
|
| Press the button to set the gain value to 18 dB. This setting takes effect with the | ||||
|
| 60i and 60P recording formats only. It is not valid when the slow shutter mode | ||||
|
| (1/15) is established. | ||||
|
| • When the gain value is switched to 18 dB or switched from 18 dB to another | ||||
|
| value, the image can be disordered for a moment. | ||||
|
| • If the unit is being used in the MANUAL mode or AUTO mode, set the AGC item | ||||
|
| on the AUTO SW screen of the setting menu to OFF to use this function. | ||||
|
| D.ZOOM: | Changes the ratio of the DIGITAL ZOOM function. | |||
|
|
|
| Each press of the button changes the ratio in the following order: | ||
|
|
|
| OFF (x1) → x2 → x5 → x10 → OFF (x1). (Page 34) | ||
|
| INDEX: |
| Index recording (Page 45) | ||
|
| SHOT MARK: Shot mark recording (Page 45) | ||||
|
| LAST CLIP: Deletes the last recorded clip. (Page 45) | ||||
|
| • After recording, clips cannot be deleted by switching to PB or PC mode, by | ||||
|
| changing the recording format, or by turning the camera off. | ||||
USER2 | (Camera) | Assigns a function to the USER2 button. | ||||
| (PB) | The setting contents are the same as USER1. | ||||
|
| BACKLIGHT |
|
|
| |
|
|
|
|
|
| indicates the factory setting. |
88
