Setup menu list (continued)
TC/UB SETUP screen
Item | Display |
| Description of settings | ||
mode |
| ||||
|
|
|
|
| |
|
|
|
|
|
|
TC MODE | (Camera) | Selects the correction mode of the internal time code generator when the time | |||
|
| code of the internal time code generator is recorded. | |||
|
| DF: | Uses the drop frame mode. | ||
|
| NDF: | Uses the | ||
|
| • TC MODE is automatically set to NDF when you set recording frame rate of | |||
|
| recording format to 24P. | |||
TCG | (Camera) | Sets the mode in which you advance the internal time code generator. | |||
|
| FREE RUN: The time code is advanced regardless of the operation mode. | |||
|
|
| A slight time error may occur when switching to PB mode if the | ||
|
|
| frame rate is set to 24P. | ||
|
| REC RUN: The time code is advanced only when recording. | |||
TC PRESET | (Camera) | Sets the initial time code. | |||
|
| YES NO |
|
|
|
|
| • Set the frame value to 0 or a multiple of 4 when you set recording frame rate | |||
|
| of recording format to 24P. If any other value is set, the recorded time code will | |||
|
| ||||
UB PRESET | (Camera) | Sets the user information. | |||
|
| YES NO |
|
|
|
EXT TC LINK | (Camera) | Synchronizes the initial time code value during | |||
|
| camera time codes are synchronized to the master internal TCG value.) | |||
|
| (Page 55) | |||
|
| MASTER: Sets the mode to master mode. | |||
|
| SLAVE: Sets the mode to slave mode. | |||
|
|
| When the COUNTER - RESET/TC SET button is pressed, input time | ||
|
|
| codes are synchronized to the internal TCG. | ||
|
| NO: | Returns to the last screen. | ||
|
| • Master and slave mode settings are only in effect when this menu is open. | |||
|
| When the menu is closed, EXT TC LINK is automatically canceled. | |||
|
|
|
|
| indicates the factory setting. |
92
