Setup menu list (continued)

OTHER FUNCTIONS screen (continued)

Item

Display

 

 

Description of settings

mode

 

 

 

 

 

 

 

 

 

 

 

 

 

POWER SAVE

CAMERA

Selects the power-saving mode when the camera is not operated for about 5

 

PHOTO

minutes while an SD Memory Card is inserted in CAMERA mode.

 

 

ON:

The camera-recorder’s power is set to OFF.

 

 

OFF:

The camera-recorder’s power is not set to OFF.

 

 

• Even when this setting is ON, the power will not turn OFF when an SD Memory

 

 

Card is not inserted, when the camera is in PB mode, or when the AC adapter

 

 

is connected.

 

 

 

 

 

• Designated operations include button and ring operations, opening/closing/

 

 

touching of the LCD monitor, and remote control operations (when IR REMOTE

 

 

is set to ON).

 

 

 

QUICK POWER

CAMERA

Sets Quick Power On mode to ON or OFF. When Quick Power On mode is

ON

PHOTO

enabled, the camera will enter recording standby mode in CAMERA mode about

 

 

1.9 seconds after power is turned ON.

 

 

ON OFF

 

 

 

 

 

 

• Startup time will not decrease even if an SD Memory Card is not inserted.

 

 

• The zoom ratio will be set to approximately x 1 wide end (Z00).

HDMI OUT SEL

CAMERA

Sets the output video format of the HDMI OUT terminal.

 

PHOTO

AUTO:

Automatically determines the output resolution based on

 

PB

 

information of connected monitors.

 

 

1080i/720P: Fix the output at the recorded resolution. (Output in 1080 interlaced

 

 

480P:

or 720 progressive mode)

 

 

Output in 480 progressive mode.

 

 

• Simultaneous output from HDMI OUT, COMPONENT OUT, and A/V OUT is not

 

 

possible. The order of priority is HDMI > COMPONENT > A/V.

CMPNT OUT

CAMERA

Selects the type of component terminal.

SEL

PHOTO

AUTO: Monitor with D4 terminal (720P/1080i output)

 

PB

1080i:

Monitor with D3 terminal (1080i output)

 

 

480i:

Monitor with D1 terminal (480i output)

 

 

• Cross-conversion is only performed when content recorded at 720P is output at

 

 

1080i. Cross-conversion does not take place in other cases.

DOWNCON

CAMERA

Switches down-conversion output mode.

MODE

PB∗1

SIDE CROP:

Crops the left and right edges.

 

 

• Images may extend beyond the boundaries of the screen and be partially

 

 

unable to be seen when outputting from the AV/OUT terminal, or when

 

 

outputting from the COMPONENT OUT terminal when the COMPNT OUT SEL

 

 

item is set to 480i.

 

 

LETTER BOX:

Adds black bars to the top and bottom edges.

 

 

SQUEEZE:

Squeezes images horizontally from the left and right.

VIDEO SETUP

CAMERA

Sets the setup level of video signals.

 

PB∗1

0%:

AV/OUT terminal output and recording setup levels will both be set to

 

 

 

0%.

 

 

 

 

 

7.5% A: AV/OUT terminal output setup level will be set to 7.5%, while recording

 

 

 

setup level will be set to 0%.

AUDIO OUT

CAMERA

Sets the audio signals output from the A/V OUT terminal.

 

PB∗1

CH1/CH2: CH1 terminal = CH1 signals, CH2 terminal = CH2 signals

 

 

CH1:

CH1 terminal = CH1 signals, CH2 terminal = CH1 signals

 

 

CH2:

CH1 terminal = CH2 signals, CH2 terminal = CH2 signals

 

 

• When an SD Memory Card containing 5.1 channel content, recorded on other

 

 

equipment, is played back on the camera, it is down-mixed to 2 channels when

 

 

output through the AV/OUT or headphone terminal.

∗1 Only during clip playback

 

 

 

 

indicates the factory setting.

110