Panasonic AG-RT850P manual Alarm recording duration setting, 0Alarm recall see, 5Video signal mode

Menu Screens

MENU SCREEN 3

The alarm recording mode and terminal output are set on Menu Screen 3.

iAlarm recording mode selection (see page 20) The recording mode in the event of an alarm input is selected. (OFF ↔ ALARM)

ALARM: When there is an alarm input during recording in the time lapse mode, the recording time mode is switched to 6H (alarm recording) and the details of the alarm status are recorded faithfully.

OFF: Alarm recording is not possible even when an alarm signal is input during recording.

oAlarm recording duration setting

This sets the time elapsing from the start of alarm recording until its end. (30SEC ↔ 1MIN ↔ 2MIN ↔ 3MIN ↔ 5MIN ↔ 10MIN ↔ CONTINUE ↔ MANUAL ↔ 30SEC...)

CONTINUE: Alarm recording continues until the tape end.

MANUAL: Alarm recording is performed while the alarm input continues.

!0Alarm recall (see page 20)

This checks the date/time (up to 4) of the alarm signals.

!1Terminal connector output signal setting

ERR WARN: When trouble has occurred in the unit (AUTO OFF), the LOW signal is output.

REC: The LOW signal is output during recording.

MENU SCREEN 4

Recording mode and video output are selected on Menu Screen 4.

!2Recording time mode selection (see page 14) When recording starts, the set time mode is always established.

(OFF ↔ 6H ↔ L18H ↔ L24H ↔ 48H ↔ 72H ↔ 96H ↔ 120H ↔ 168H ↔ 180H ↔ 240H ↔ OFF...) OFF: Any time mode can be set using the TIME MODE button on the front panel. It can be changed even while recording is in progress.

6H: 6-hour mode (compatible with the standard mode of ordinary VTRÕs).

L18H/L24H: L18-/L24-hour mode (linear slow recording).

48H/72H/96H/120H/168H/180H/240H: 48-/72-/96-/120-/168-/180-/240-hour mode (time lapse recording).

!3Selection of VTR operation when cassette is inserted

STOP: Stop mode

REC: Simply by inserting the cassette tape, record- ing is started automatically.

REWREC: When the cassette is inserted, it is first rewound to the start of the tape and then recording is started automatically.

!4Selection of operation when tape end is de- tected during recording (see page 18)

STOP: Stop mode

REW: The tape is automatically rewound to the start where it stops.

REPEAT: The tape is automatically rewound to the start, and recording is repeated.

EJECT: The tape is ejected.

!5Video signal mode

This selects the operation of the color/black-and- white automatic selector circuit.

AUTO: The circuit automatically identifies the type of video input or playback signals, and selects the color or black-and-white mode accordingly.

COLOR: The color mode is forcibly established.

B_W: The black-and-white mode is forcibly established.

!6Playback picture quality selection

The detail of the playback images can be emphasized.

OFF: Regular mode

ON: The playback picture has emphasized outlines.

MENU SCREEN 5

The internal timer recording modes are set on Menu Screen 5.

!7Internal timer recording mode setting (see page	Note:
16)	Internal timer recording does not operate when the
This sets the weekly timer or daily timer recording	date and time have not been set.
mode. (OFF/ON)
OFF: Internal timer recording is not set.
ON: Internal timer recording is set. (The start and
stop times are set.)

10