t When the shift ( ) button is pressed, the hour digits flash.
Press the SET (+, Ð) buttons to set the hour to Ò3Ó.
[TIME ADJUST] | P1 |
| TIME |
| |||
|
| ||
3:00:00 |
|
|
|
|
|
|
|
yWhen the shift ( ) button is pressed, minute digits flash.
Press the SET (+, Ð) buttons to set the minutes to Ò25Ó.
[TIME ADJUST] | P1 |
| TIME |
| |||
|
| ||
3:25:00 |
|
|
|
|
|
|
|
uWhen the MENU/REC LOCK switch is set to OFF, the clock automatically starts running from time and date set.
TIME
Flashing 
For the seconds, Ò00Ó is set.
Even when the switch is set to MENU, the time will keep advancing if it has not been changed.
¥To clear the date and time display, set POSITION under (DISPLAY) on Menu Screen 2 to OFF.
¥Even if the power should fail for a period of up to one week, the date, time and other display time mode data are stored in the memory (but only if power has been supplied continuously to the unit for 3 or more days).
When the unit has just been purchased or when it has not been used for along time, the data is not stored in the memory and the display shown below appears.
[TIME ADJUST] | P1 |
0:00:00
When the time is reset to Ò0:00:00Ó as described, check the menu settings. If any of the settings are incorrect, please set them again.
¥For the date setting, the unit automatically adjusts for leap years.
¥Due to temperature fluctuations and other factors, the clock time may run fast or slow with a monthly error of up to ±60 seconds. This is not indicative of malfunctioning. Reset the time at regular intervals.
Time/Date Display Position
The position of the date and time displays on the TV monitor changes as shown below when (DISPLAY) on Menu Screen 2 is changed.
|
|
| Top left corner |
|
|
| Top right corner |
|
|
| Bottom left corner |
|
| Bottom right corner | Center | No display |
|
| ||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
q Set the MENU/REC LOCK switch to MENU to display to menu screens. Press the page button to display Menu Screen 2 on the TV monitor.
POSITION :
wPress the set (+, Ð) buttons to position the display as desired.
POSITION :
eUpon completion of the settings, set the MENU/ REC LOCK switch to OFF. The regular screen is restored, and the date and time appear at the selected position.
TIME/DATE display position adjustment function
When the unit is in STOP or EJECT mode, the position of the displayed time/date can be adjusted by pressing the TRACKING (Ð) or TRACKING (+) button.
¥Pressing the TRACKING (Ð) button moves the position vertically. (Pressing the button 3 times will return the display to its original position.)
¥Pressing the TRACKING (+) button moves the position horizontally. (Pressing the button 3 times will return the display to its original position.)
¥Pressing the (Ð) and (+) buttons simultaneously will return the display to its original position (factory setting).
13
