reactivate the remote control.
To use the forward and backward buttons on the remote to advance slides in PowerPoint ®, connect the USB connector on the computer cable to the computer. You must install the USB drivers on your computer to enable USB connectivity. To configure the PowerPoint for this, click Options from the Tools menu, click the View tab, deselect the Popup Menu on Right Mouse Click option in the Slide Show section, and then click OK. Then, when you are in the PowerPoint Slide Show mode, click the left mouse button to advance to the next slide, and click the right mouse button to return to the previous slide (other PowerPoint modes are not affected).
Adjusting the projector
To focus the image, rotate the focus ring (see the following illustration) until the image is clear. To zoom the image, rotate the zoom ring . This adjusts the image size without affecting focus.
1
2
The projector is equipped with a
1. Press and hold the elevator button | (see the following illustration). |
