Use this setting to select between On and Off. When it is on, most new computers will automatically recognize the projector and then set the monitor resolution and refresh rate accordingly. You need to set the Plug and Play setting to Off for the projector to properly display images from some older computers. The Plug and Play setting does not affect video images.
If the projector display constantly changes between the computer image and the message, “Perfecting the image,” you might need to turn Plug and Play off.
Display messages
Use this setting to select between On and Off. When this feature is on, status messages such as “No signal detected” or “Standby Active” are displayed in the
Display startup screen
Use this setting to select between On and Off. When this feature is on, the startup screen is displayed when the projector starts, and remains until an active source is detected. The startup screen contains projector support contact information. Click the left or right navigation button to turn this feature off and display a plain black or blue screen instead of the startup screen.
Language menu
The following settings allow you to adjust the language.
You can display the
Installation and user’s guide
