14a Power Zoom Lens (option)

1

2 > 3 5 4 6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

8 9 : = ;<

1Automatic iris control

This enables the automatic iris speed to be adjusted.

Removal of the rubber cap reveals the control inside. The speed is increasing by turning the control clockwise but take care not to turn it too far since hunting (continuous cycling) will occur.

This control must be adjusted when the lens has been replaced or when a lens has been mounted for the first time.

2Lens iris selector switch (IRIS)

(A) side: The iris is adjusted automatically.

(M)side: Set to this position to adjust the iris manually.

3Power zoom control switch

The zoom can be controlled electrically by setting the power/manual zoom selector switch to SERVO and then pressing the power zoom control switch. The zoom speed differs depending on the force with which the switch is pressed.

4Hand strap

Adjust this to fit the size of your hand.

5Return switch (RET, REC CHECK)

This switch is for checking a recording. When it is pressed in the recording pause mode, the recording check function is activated, the recorded section is played back, and then the recording is placed in the pause mode.

6VTR start/stop switch

This switch provides easy manual access to starting and stopping the VTR recording. When it is pressed once, recording starts; when it is pressed again, it stops. When using this lens, the VTR can be controlled by this switch or the VTR start/stop switch on the camera.

7Lens cable (12-pin)

This cable is to be connected to the LENS connector.

8Focus ring

This ring is turned to focus the lens.

9Zoom ring

To adjust the screen size, set the power/manual zoom selector switch to MANU,and turn this ring.

– 13 –