Panasonic AJ-D215P Normal recording, 1 Set the POWER switch to ON, 3 Set the camera switches as shown below, 6 Press the VTR START/STOP button to stop the recording

Normal recording

2

1 POWER

OFFiON

1 Set the POWER switch to ON.

2 Press the EJECT button to open the cassette holder, and insert the cassette tape.

OBefore proceeding with the recording, make sure that the cassette tab

has been set to the REC position. OThis unit uses “L” cassettes only.

REC

SAVE

3 Set the camera switches as shown below.

Select the desired shutter speed if necessary. (Normally, the camera is used with the shutter off.)

Set the OUTPUT selector switch to CAM.

Select the desired white balance mode using the white balance selector switch.

Set the GAIN selector switch to a setting which corresponds to the brightness of the subject.

Adjust the white balance if the white balance selector switch is at MEMO.

4 Point the camera at the subject and adjust the focus and zoom.5 Press the VTR START/STOP button to start the recording.6 Press the VTR START/STOP button to stop the recording.

– 43 –