3OUTPUT selector switch

CAM: The video signals shot by the camera are output.

BAR: The color bar signals are output.

<Note>

Shown in the figure below are the output levels which are shown as color bar signals by this unit.

It should be noted that these are not SMPTE color bars.

Yellow

Cyan

Green

 

White

Magenta

 

Red

 

Blue

1.15 V 1.0 V

Black

0.286 V

4SHUTTER switch

This is the ON/OFF selector switch of the electronic shutter.

OFF: The electronic shutter does not work at this position.

ON: The electronic shutter is operational at this position.

SELECT: This position is used to change the speed of the electronic shutter. This is a non-locking switch. Each time it is operated, the shutter speed changes by

one setting in the following sequence:

1/1001/1251/2501/500 1/1000

1/20001/40001/8000. When the switch is operated at 1/8000, the speed returns to the 1/100 setting.

5POWER switch

ON: All the functions of the camera VTR are made operational.

OFF: The power to the camera VTR is turned off.

6MODE CHECK switch

This enables the settings of the camera’s function switches to be checked in the viewfinder.

7BREAKER switch

If trouble causes an excessively high current to flow inside the unit, the circuit breaker is tripped, causing the power to be turned off automatically to protect the unit.

Upon completion of inspection inside or repair work on the unit, push this button to the “in” position. The power will be turned on again

provided that no trouble has occurred.

8Earphone (PHONE) jack

This is the earphone (stereo) jack for monitoring the sound. When an earphone is connected, no sound will be heard from the speaker.

9Audio input connectors

External microphones are connected here. Line input signals can also be connected by setting an internal switch to the corresponding position.

:Speaker

The sound can be monitored through this speaker. OThe sound from the speaker is automatically cut off when an earphone is connected to the

PHONE jack.

OThe CH1 and CH2 sound is mixed and heard as the monitored sound.

;Audio monitor level control

This volume control is used to adjust the sound when it is being monitored.

<MARK/CANCEL button

This is the SCENE data function switch. For further details, refer to the SCENE data function section (on pages 56 and 57).

=Viewfinder

>Shoulder belt fitting

The shoulder belt is fastened here.

?External DC input socket

This socket is for the external power (DC) supply. Connect an AC adaptor.

When the adaptor is connected, power is automatically supplied from the external power source.

@ND filter ON/OFF switch OFF: The ND filter is not used. ON: The ND filter is used.

ADVCPRO interface connector installation area (option)

– 8 –