Disengaging the unit from the tripod mount adaptor

Tripod mount adaptor

Red lever

Black lever

 

Move the black lever in the direction indicated by the arrow while holding

 

down the red lever, and disengage the unit by sliding it toward you.

NOTE:

If the pin of the tripod mount adaptor fails to return to its original

 

position after the unit has been disengaged, again move the black

 

lever in the direction indicated by the arrow while holding down the

 

red lever. This returns the pin to its former position.

 

Bear in mind that the unit cannot be mounted if the pin is left in the

 

center.

Fastening the shoulder belt (option)

Shoulder belt

The tab opens when pressed.

To release the shoulder belt, open the tabs at both ends and disengage.

The tab opens when pressed.

NOTE:

Check that the shoulder belt is securely fastened.

– 30 –