[VTR] The video and audio performance specifications apply for a tape which has been recorded on

this unit and played back on a standard player (ANALOG COMPONENT OUT).

Tape speed:33.8201 mm/sec

Recording/playback time:

Approx. 184 min. (using AJ-5P92LP)

For AJ-5P92LP cassette tapes, use a VTR supporting DVCPRO (25

Mbps) 184 minute tapes.

 

FF/REW time:

Less than 8 min. (using AJ-5P92LP)

 

Video signal band:

Brightness = 0 Hz to 5.75 MHz, +1.0 dB/–3.0 dB

 

S/N ratio:

55 dB

 

Linearity:

Less than 2%

 

Y/C delay:

Within 30 ns

 

Audio sampling frequency:

 

 

48 kHz (synchronized with video)

 

Quantizing:

16 bits/sample

 

Frequency response:

20 Hz to 20 kHz, +1.0 dB/–1.5 dB (at reference level)

 

Distortion:

Less than 0.2% (at 1 kHz, operating level)

 

Crosstalk:

Less than –65 dB (between channels, at 1 kHz)

 

Wow and flutter:

Below measurable limits

 

Headroom:

20 dB

[CONNECTORS]

 

INPUT

FRONT MIC:

Phantom +48V (built-in microphone), –60 dBu, balanced, 3 kΩ

 

 

(–60, –50 or –40 dBu setting possible on menu)

 

AUDIO IN CH1/CH2 (XLR, 3P):

 

 

–60, –50 or –40 dBu setting possible on menu, balanced, 10 kΩ

 

 

Internal DIP switch setting:

 

 

Phantom 48V output possible

 

 

line (–6/0/+4 dBu) switchable

OUTPUT

AUDIO OUT CH1/CH2 (Phono pin jack):

 

 

–6 dBu, unbalanced, low impedance output

 

HEADPHONE OUT:

Stereo mini jack

 

VIDEO OUT (BNC):

1.0 VP-P, 75 Ω

 

S-VIDEO OUT:

Y signal = 1.0 VP-P, 75 Ω

 

 

C signal = 0.286 VP-P(burst), 75 Ω

OTHER

DC IN (XLR, 4P)

 

 

LENS (12P)

 

 

DVCPRO interface connector (option):

 

 

Complies with IEEE 1394-1995 standard

[ACCESSORIES]

1.5˝ viewfinder

Microphone (attached to main unit) Battery holder (attached to main unit)

Battery mounting connector and screw supporting Sony-made battery (NP-1B)

– 66 –