Panasonic AJ-D850A - page 17

– 17 –

<Connector area>

qAC IN connector

This is for connecting the unit to the power outlet using the power cord provided.

wSIGNAL GND terminal

This terminal is connected to the signa unit which is connected to the unit in order to

reduce noise. It is not connected to ground for safety purposes.

eFuse holder

This contains a fuse.

rFan motor

This is for cooling the unit.

The W lamp lights when trouble has caused the fan motor to stop. If the unit is still

operated in the warning status, the temperature inside the deck will rise, and when it

exceeds the safety temperature, all the unit’s operations will be shut down.

tANALOG AUDIO IN connectors

These are the analog audio input connectors.

yCUE IN connector

The analog signal to be recorded on the CUE track is supplied to this connector. The

audio signals from a microphone can also be recorded by selecting the –60 dB input mode

on the setup menu No. 702 (CUE IN LV).

uTIME CODE IN connector

This is the connector for recording the external time code on the tape.

iANALOG COMPONENT VIDEO IN connector

The analog component video signal is supplied to this connector.

oANALOG COMPOSITE VIDEO IN connectors and 75Ω termination switch

The analog composite video signal is supplied to these two connectors which are

connected in a loop-through configuration. When the termination is required, set the

switch to ON.

!0REF VIDEO IN connectors and 75Ω termination switch

These are the input connectors for the reference video signals. When the termination is

required, set the switch to ON.

!1ANALOG AUDIO OUT connectors

The analog audio signals are output from these connectors.

!2TIME CODE OUT connector

The playback time code is output from this connector during playback.

During recording, the time code generated by the internal time code generator is output.

!3CUE OUT connector

The analog signal recorded on the CUE track is output from this connector.

!4MONITOR OUT connector

During playback, the playback signals from the CUE track or PCM audio signal CH1/CH2

are output from this connector.

Contents

Main IMPORTANT WARNING: CAUTION: Contents General and Features Features Features Time codes Multi-function input/output interfaces 2-channel high-sound-quality digital audio Automatic editing functions Front panel <Front Panel Top Section> Page Page Page Page Page Page Page <Front Panel Bottom Section> Connector area q rt i !2 !3 !4 !5 !6 !7 !0 !1 Page <Connector area> Connections when one unit is used Set the CONTROL switch on the front panel to LOCAL. Page Connections with editing controller Connections for adjusting video output (encoder output) signals Tapes Switching on the power/inserting the cassette Before starting to operate the unit, check whether the equipment has been connected properly. 1 2 3 1 3 2 4 STOP/STAND BY mode 1 2 Recording 1 2 3 4 5 5-1 Page Jog/shuttle Jog mode 1 2 3 Page Preroll 1 Page Page Selecting the editing mode 1 2 3 1, 2 3 1, 32, 4 Checking the edit points 2 1, 3 1 The value of the entered edit point appears on the display. 2 3 3-1, 3-2 2 Preview 1 Normal preview is now performed. Automatic editing Executing automatic editing 1 Page Page Audio split editing Button This denotes audio split editing. Entering the edit points Deleting the edit points Audio split editing Displaying the audio split edit points Cueing up the tape to the edit points Duration display Page Page Page Fig. 1 Fig. 2 Audio cross channel editing Example: To record cross-faded audio signals onto CH2 Connections 1 2 3 <Note> Select the video as well if the video signals are also going to be edited. Page V blanking data recording/playback Additional line recording/playback function Teletext signal recording/playback function Video output (encoder output) signal adjustments 1 2 4 3 3-1 Setup (default settings) Changing the settings 2 3 4 2 3 Setting and releasing the lock mode. 2 3 4 5 Loading a user file 2 3 4 5 6 Page SYSTEM menu <SYSTEM> SYSTEM menu <SYSTEM> Page Page Page Page Page Page Page Page Page Page USER menu <TIME CODE> Page Page Page Page Page Page Page Page Page Page USER menu Time code/user bit Time code User bit Page Reproducing the time code/user bit 1 2 3 4 Superimpose screen Servo reference 1 2 3 4 Servo reference setting tables Audio V Fade Function Rack mounting 1 2 5 Condensation Installing the mechanism dust protector Video head cleaning Error messages DIAG menu Displaying the DIAG menu 1 2 Displaying the HOURS METER information Error messages Warning messages Table of AUTO OFF Error messages Counter display Description VTR operation (Restart condition) Monitor display Table of AUTO OFF Error messages Counter display Description VTR operation (Restart condition) Monitor display 1. Introduction 2. Hardware specifications External interface specifications 3. Software specifications Protocol 4. Error code table 5. Command table (1) Commands relating to operation control Page (2) Commands relating to inquiries Page Connector signals VIDEO IN VIDEO OUT AUDIO IN AUDIO OUT PARALLEL REMOTE (25P) RS-232C REMOTE (25-pin D-SUB crossover cable supported) ENCODER REMOTE (15P) Printed circuit board Specifications GENERAL (Video signals adjustment) AUDIO (Digital audio) (Cue track)