Setup menus
– 78 –
USER menu <MENU>
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
A00 LOAD 0000 USER2
0001 USER3
0002 USER4
0003 USER5
A01 SAVE 0000 USER2
0001 USER3
0002 USER4
0003 USER5
0004 LOCKED
A02 P.ON LOAD 0000 OFF
0001 USER2
0002 USER3
0003 USER4
0004 USER5
A03 MENU LOCK 0000 OFF
0001 ON
The underline on the setting item denotes the initial setting.
<Notes>

• No. A00 (LOAD), No. A01 (SAVE) and No. A02 (P.ON LOAD) are the menu items which can

be set only for USER1. They are not displayed with the USER2 – USER5 files.

• No. A03 (MENU LOCK) is the menu item which can be set only for the USER2 – USER5

files. It is not displayed with USER1.

This selects the user file whose contents will be loaded into
USER1.
0: The USER2 file contents are loaded.
1: The USER3 file contents are loaded.
2: The USER4 file contents are loaded.
3: The USER5 file contents are loaded.
<Note>
When the SET button is pressed after loading, the setting will
be stored in the memory. When the MENU button is pressed,
the setting will not be changed.
This selects the user file into which the USER1 settings will be
saved.
0: The settings are saved in USER2.
1: The settings are saved in USER3.
2: The settings are saved in USER4.
3: The settings are saved in USER5.
4: This display appears when all the user files are in the
change prohibit status.
<Notes>
• User files whose status have been set to change prohibit
cannot be selected.
• When all the user files are in the change prohibit status, the
“LOCKED” display appears and the contents cannot be
saved.
This loads the contents of the selected user file into USER1
and it starts operation with the USER1 settings when the
power is turned on.
0: Operation is started with the settings of the previously set
user file.
1: The contents of USER2 are loaded into USER1 and
operation is started with the USER1 settings.
2: The contents of USER3 are loaded into USER1 and
operation is started with the USER1 settings.
3: The contents of USER4 are loaded into USER1 and
operation is started with the USER1 settings.
4: The contents of USER5 are loaded into USER1 and
operation is started with the USER1 settings.
This selects whether to set or release the user file (USER2 –
USER5) lock mode.
0: The lock is released (changes can be made).
1: The lock is set (changes are prohibited).
<Note>
The lock cannot be set for USER1.