Panasonic AJ-D950 Search, Dial, Key, Shtl MAX, Ff. Rew, Max, Audio, Mute, Alarm, Auto EE, Stop

USER menu

<OPERATION>

	Item		Setting
								Description
No.	Superimposed	No.		Superimposed
	display				display
100	SEARCH	0000			DIAL			This selects the direct search dial operation.
	ENA	0001			KEY			0: For direct search dial operations.
								1: Operation is not transferred to the search mode unless the
								search button is pressed.
101	SHTL MAX	0000		×8				This sets the maximum speed for shuttle operations.
		0001		×16				0: 8× normal speed
		0002		×32				1: 16× normal speed
								2: 32× normal speed
102	FF. REW	0000		×16				This sets the maximum speed for FF and REW operations.
	MAX	0001				×32		0: 16 (32)× normal speed
		0002		×50				1: 32 (60)× normal speed
								2: 50 (100)× normal speed
								<Note>
								Values for the 411 (25M) mode are shown in parentheses ( ).
103	AUDIO	0000			OFF			This sets the status until the audio signal is output when
	MUTE	0001				ON		operation switches from the stop or search modes to the play
								mode.
								0: The time until the audio is output is shortened.
								1: The audio is output after the status stabilizes.
								<Note>
								When set to 0 (OFF), the sound in the initially output part is
								incomplete. Therefore, this setting is not recommended for
								broadcasts.
104	REF	0000			OFF			This selects whether to warn the operator when the
	ALARM	0001				ON		REF.VIDEO signal has not been connected.
								0: Warning is not given.
								1: Warning is given by the flashing STOP lamp.
105	AUTO EE	0000			S/F/R			This selects the VTR mode in which the EE status is
	SEL	0001			STOP			established when the TAPE/EE switch is set to EE.
		0002			BLACK			0: EE status is established in the STOP, FF or REW mode.
								However, EE status is always established in EJECT mode
								regardless of the TAPE/EE switch setting.
								1: EE status is established only in the stop mode. However,
								EE status is always established in EJECT mode regardless
								of the TAPE/EE switch setting.
								2: EE status is established only in the stop mode. However,
								depending on TAPE/EE switch setting EJECT mode is as
								follows:
								TAPE/EE switch EE: EE status
								TAPE/EE switch TAPE: BLACK status for video
								MUTE status for audio
106	EE MODE	0000			NORMAL			This selects the EE mode output signals.
	SEL	0001			THRU			0: Signals are output with a delay equivalent to the length of
								internal signal processing.
								1: Signals are output directly, without internal processing, and
								so are output with no delay.
								<Note>
								When editing mode is selected, SDTI is selected as the video
								input signal, or INT SG is selected at either VIDEO or AUDIO,
								he internal operations are forcibly set to NORMAL.
107	PLAY	0000					0	This set the play delay time in frame increments.
		.			.
	DELAY	.		.
		.		.
		0015		15

The underline on the setting item denotes the initial setting.

– 49 –